Jump to content
Sign in to follow this  

Enzo suspention oil volume?

Recommended Posts

i picked up an 06 YZ 250F with enzo suspention and the seals are just starting to weep so in the process of changing the seals i discovered that the outer fork oil volume is 275cc in each fork.  i have no issues when riding with the forks, but that seems really low considering the manual calls for around 350cc.  does enzo normally fill their forks with that amount of oil?  the previous owner could have drained some out if that is not the normal volume enzo uses, think i should i bump it up to 300 or 350? 

Share this post


Link to post
Share on other sites

I doubt if the the oil level should be that low. If I was you Id just call Enzo.

Share this post


Link to post
Share on other sites

i filled it to 350.  guess i'll find out and figure i can drain some out through the bleed hole if needed.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×