Jump to content
Sign in to follow this  

02 CR250 fork problems

Recommended Posts

I am trying to rebuild the forks on the 02 Cr250.  I can not get one of the inner tubes to function correctly.  The first one i did came out okay, but the second one slows down 3/4 of the way up and needs help to fully extend. I tried starting over 3 times and tried to bleed them but still cant get them to work right.  Any ideas what could cause this?

Share this post


Link to post
Share on other sites

One of your o-rings, either the one at the tip of the cartridge or the one seated inside the compression base, is leaking. 

Share this post


Link to post
Share on other sites

One of your o-rings, either the one at the tip of the cartridge or the one seated inside the compression base, is leaking. 

 

Cool, thanks.  I had one of the o rings switched with the rebound adjuster one.  Switched them and everything is working good now.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×