Jump to content
Sign in to follow this  

JD & MRD Installed But Need Some More Help

Recommended Posts

I did the JD jet kit install and MRD uncorked pipe install and the 3X3 mod today.

 

I will say one thing, the skid plate is a bolt and washer magnet.

 

Everything is complete and I took it for a ride.

 

The bike starts perfect, idles great but it felt soft on the power delivery, it just did not have that jump and pull it normally has.

 

I am running these settings.

 

Main jet: 160

Needle: Blue on clip 4

Pilot jet: -25

Fuel screw: set to 2.75

 

I turned the fuel screw down to 2.50 and I think it felt better than after that I kept making changes and not know WTF was going on so I called it quits.

 

Can anyone help me out with some ideas or suggestions?

Share this post


Link to post
Share on other sites

From my experience(s) try a 165 main & take it from there.

 

I ended up with a 175mj,  blue#5,  25pj,  2.875 turns out.

Edited by billdirt1
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×