Jump to content
Sign in to follow this  

Rear rim offset for 150xc

Recommended Posts

My buddy is trying to lace a KTM 150xc rear 18" rim.  He didn't check the offset before disassembling the stock wheel and I cannot find the spec after searching.  In case I am using the wrong term I am looking for the spec for how far away the edge of the rim should be from the surface of the sprocket mounting surface so that the rim is properly positioned laterally over the hub.

Share this post


Link to post
Share on other sites

My buddy is trying to lace a KTM 150xc rear 18" rim.  He didn't check the offset before disassembling the stock wheel and I cannot find the spec after searching.  In case I am using the wrong term I am looking for the spec for how far away the edge of the rim should be from the surface of the sprocket mounting surface so that the rim is properly positioned laterally over the hub.

when it is true on your stand it is good to go

Share this post


Link to post
Share on other sites

when it is true on your stand it is good to go

Ok thanks. KTM must be different than my Honda. They actually publish an offset that needs to be set when lacing. Must have something to do with the hub design.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×