Jump to content
Sign in to follow this  

94 kx250 oil help

Recommended Posts

I just purchased a 94 kx250 and the person I bought it from said he changed the oil not too long before. Just to be safe I tried to change it but the drain plug has been welded over. The original owner said he did it because the bolt was stripped and he just used a pump to get the oil out. I tried that and I'm not getting any out but the level says its full. It still runs but I want to be on the safe side and put in my own oil.

Share this post


Link to post
Share on other sites

Friggin Mo-chanics, idiot should have used a heli coil. Your going to have to grind off the jb crap he probably used and EZ out the bolt. I just did my rear tire popped on a 606 and also changed my oil to boot! I still use Golden Spectro full synthetic for all of my bikes. Still the best imo for two stroke and 4's.

 

Good luck!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...