Jump to content
Sign in to follow this  

r6realtor mirror mod for wr250r and crf250l

Recommended Posts

since I am getting like 4 or 5 pm a week on this I figured I would just post up some info on the bar end mirrors that i do on all my bikes(crf250l and 2 wr250r's)

here is the link for the mirrors themselves


where I say the little plastic thingy from yamaha that is wrong, that is where the metal sleeves go, you can use the stock rubber covers from the yami and honda mirrors.

 

you need two M10x1.25x75 bolts and two steel metal sleeves that will cover about 75% of those bolts, drill out the mirrors to the appropriate sizes to put the bolt through, slide the sleeves over the bolts and tighten down.

yeeaWwL.jpg

FbXJQND.jpg

o6GgxdN.jpg

6knxxgP.jpg

kv5OpCT.jpg

Wc66dOA.jpg

Edited by r6realtor

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...