Jump to content
Sign in to follow this  

Drz400S jetting

Recommended Posts

So I traded my Dad a Yamaha Blaster for his full FMF exhaust that Ive been using on my DRZ. He hasnt really rode it since he's gotten it but now he's getting his license and it's time for me to dial in his jetting. He has:

Stock exhaust (courtesy of me)

3x3 mod

Mikuni 36 carb

Stock fuel screw

Altitude: 100-500 ft above sea level

And I already have the JD kit from when I did my bike, so what would I need to put in there.

Right now it has a hanging idle after any type of revs, so I'm assuming the PO jetted for the pipe and 3x3 which is good.

Thanks for any input!

Share this post


Link to post
Share on other sites

So I traded my Dad a Yamaha Blaster for his full FMF exhaust that Ive been using on my DRZ. He hasnt really rode it since he's gotten it but now he's getting his license and it's time for me to dial in his jetting. He has:

Stock exhaust (courtesy of me)

3x3 mod

Mikuni 36 carb

Stock fuel screw

Altitude: 100-500 ft above sea level

And I already have the JD kit from when I did my bike, so what would I need to put in there.

Right now it has a hanging idle after any type of revs, so I'm assuming the PO jetted for the pipe and 3x3 which is good.

Thanks for any input!

 

155 main

Blue Needle 3rd clip

25 pilot jet

Fuel screw set to 2.75 turns out

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...