Jump to content
Sign in to follow this  

Rm 65 shocks

Recommended Posts

Does anyone have a link to an image of the stock front shocks with all internal parts . I was also wondering why there would be a 2 inch piece of 3/4 in PVC at the top of the spring? My thought was to keep it from bottoming out but I'm not sure

Share this post


Link to post
Share on other sites

I don't think that PVC would be in the OEM schematic -- it is likely a spacer to pre-load the fork springs increasing stiffness but reducing travel.  

Share this post


Link to post
Share on other sites

RockymountainATV would show a parts diagram in their OEM parts page for the factory internals. 

 

Places like Race Tech send a short piece of PVC that you cut to fit, to correctly set your sag or preload where you want, when you order their spring kit.

Edited by THBplayground

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×