05 grizzly Carb issues

[Pennings03]

I have an 05 grizzly and I just put a new carb kit in, and now I can't get it to idle properly. It idles too high and I have the low idle screw turned all the way out. I can actually bottom out the fuel air jet and it still idles too high. I am out of ideas. Thanks

[rschem]

I would check the float level and the neadle valve .If the float level is too high it could cause the high idle.

Edited October 7, 2014 by rschem

[Pennings03]

I got it figured out! The throttle plate was installed backwards by my little brother ooops.