Jump to content

110 zstar automatic (Logan/loncin)


Recommended Posts

Ok so after going over this little atv for my daughter I rode it around a bit and once it warms up it wants to stall. I put it back in the shop after without even looking at it and being late fall in Canada it's pretty chilly. I would assume I have it running to lean atm but any other suggestions for what to look at would be appreciated.

Link to comment
Share on other sites

Make sure there are no air leaks at the intake/head or the carb/intake area, leaning it out even more.

You might also need to go up a size on the pilot and/or main jet, for the winter.

I should have mentioned there is an air leak between the intake manifold and the head I know I need to address already and it is jetted appropriately I just have the fuel turned in to far right now because it was still warm when I bought it and started working on it.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...