Jump to content

93 CR125 Rebuild


Recommended Posts

Hi all. Thinking it be cool to start a rebuild log on my bike.

 

So far its going good but have had 1 little problem with the FMF fatty not lining up right Also finding it hard to find the aftermarket aluminum radiator guards / grills (Not the brace's or cages)

 

1993 Honda CR125 As I brought it.

01_zps992e5ce9.jpg

 

02_zpsa29fa7db.jpg

 

Day after getting it I started stripping it. Only rode it up and down the drive way at the sellers house 2 times. Photo of my ugly mug also.

03_zps51e508d8.jpg

 

04_zps267c9743.jpg

 

05_zps9b21b9b7.jpg

 

Removed the plastic side cover. 🤦  Oh hell someone has tried to hide there pudding in there. Was slimy muddy goo. After looking at the plastic side cover I can see where the dirt water has made its way in. Fixing this with after market aluminum cover and new gasket.

06_zps77893c9b.jpg

 

After a lot of hard work removed the linkage and swing arm bolts I have a empty frame.

07_zps53212c64.jpg

 

Engine sitting ready to be worked on and after I gave it a clean.

08_zpsafe517a3.jpg

 

Old seat will be stripped and recovered later on.

09_zpsa32073af.jpg

 

Frame ready to go to media blaster then powder coated.

010_zpsc051e548.jpg


New parts.

011_zpse56e112c.jpg

 

012_zpsaed35467.jpg

 

013_zps4ef4d291.jpg

 

014_zps74daf581.jpg

 

Frame back from the powder coat shop. Colour is sky blue with metallic flake in gloss coat.

015_zps9103cd9a.jpg

 

016_zpscd34b800.jpg

 

017_zps4b2808e6.jpg

 

More new parts.

018_zps19f77fbe.jpg

 

019_zpsdb2a0ffa.jpg

 

Started putting parts onto the frame to sort out new bolts and make sure things fit.

020_zps3170097c.jpg

Edited by 93cr125
  • Like 1
Link to comment
Share on other sites

Bolts on the foot pegs are only there temporary.

021_zpsca815bd5.jpg

 

022_zps612b2cd7.jpg

 

Shocks all rebuild.

023_zps9879a4a7.jpg

 

024_zps1f334763.jpg

 

Rebuilt the front and rear calipers.

025_zps117beb88.jpg

 

New parts again.

026_zpsccb0600a.jpg

 

More parts test fitting.

027_zps7f995cf1.jpg

 

028_zps810e7822.jpg

 

Had to wait 5 weeks to get the frame guards as they had been out of stock. :( But got them in the end.

029_zps3e1f9237.jpg

 

030_zps17e26953.jpg

 

032_zps97644253.jpg

 

After market bigger tank and cap.

031_zps59eba0c1.jpg

 

Printed to scale graphics templates for the bike to test fitment before designing graphics for the bike.

033_zps000fab38.jpg

 

Will have another update this weekend as there is still photos on camera and parts still to turn up.

 

Hope you enjoy looking. Happy for any feedback also.

Edited by 93cr125
  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...