Jump to content

Drz Talon hub tabs for speedo drive bent

Recommended Posts

Happy Holidays everyone,

This is my first post (clap clap) 🙂

I've got a drz400s with SM wheels/Talon Hubs.

Hub Tabs are a little bent as the speedo drive will not hook up flush like it normally should. Looks like a tab ripped open a little crap in the drive as well. What are my options? Buy Vector and Dremel tabs off then replace with Speedo spacer? All help is greatly appreciated. Thank you so much and happy riding.

ImageUploadedByThumper Talk1418227393.702265.jpg

ImageUploadedByThumper Talk1418227488.083399.jpg

ImageUploadedByThumper Talk1418227531.560909.jpg

Link to comment
Share on other sites

I don't see the problem.  The hub looks OK.  The tabs just need a little clean up.  The speedo drive needs to be taken apart and the drive tabs on the gear straightened out.  That should provide a good positive connection.  The problem occurred because the speedo drive was not lined up correctly when the wheel was installed at some point and it bent the tabs.

Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

  • Create New...