Jump to content

GYTR clutch basket


Recommended Posts

I have a 2004 wr250f that I bought with very low hours.It has the typical clutch issues,dragging, hard to start in gear.

I purchased a new gytr basket with passages on the fingers to provide increased oil flow.Will I need the gytr hub and pressure plate to get the most out of this set up,or will the stock components work?Thanks

Link to comment
Share on other sites

I have a 2004 wr250f that I bought with very low hours.It has the typical clutch issues,dragging, hard to start in gear.

I purchased a new gytr basket with passages on the fingers to provide increased oil flow.Will I need the gytr hub and pressure plate to get the most out of this set up,or will the stock components work?Thanks

 I cannot say with certainty that it will be fine but in my experience with billet clutch baskets I have been able to run an aftermarket Wiseco billet basket and stock pressure plate and clutch boss with no issues at all. I would assume it would be the same with the GYTR Basket.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...