Some 94 rm125 questions

Ok so my 94 rm125 runs perfect I think. The problem I have is that when I slip the clutch to keep it in the power it does nothing. The clutch it self is in good shape and doesn't slip. I ahve to fully pull the clutch in and wait a second for the revs to build and then release the clutch to slip it. I know it shouldn't be like this I should be able to slip the clutch quick and have that burst of power you need from a 125. What should I be looking at to try and fix this problem? Is it a jetting issue?

Maybe switch ur oil up. Is your cable sticking?

I had a broken plate once also

Maybe switch ur oil up. Is your cable sticking?

I had a broken plate once also

No the cable is perfect a nice easy pull. Would dirty oil do that I honestly have no clue how clean or dirty the oil is or when the last time I changed it honestly. the bike sits wayyy more than it gets used.

If that's the case, change the oil. It's cheap and should be changed often anyway.

If that's the case, change the oil. It's cheap and should be changed often anyway.

I know all I did was take it out of the garage from sitting for a year or 2 and rode it maybe 3 times last year and had that clutch problem didn't even think to change the oil lol. It did have oil tho I made sure to check that haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now