float height PWK 38 on 125?

Does anyone know what the recommended float height for a PWK 38 airstriker is?

 

It´s installed on a 2002 125.

Pretty sure it's 16mm....

Does anyone know what the recommended float height for a PWK 38 airstriker is?

 

It´s installed on a 2002 125.

 

 

 

 

AS1 PWK =  Round screw on top, should have a float height of 16mm

 

AS2 PWK = Flatish rectangular top, held on by 2 screws. should have float height of 7mm

Thanks mate, I have the AS2. Is there an official manual for this?

Same float in both, as well as the PJ's... 16mm.. I think the TMX's are 7mm

AS1 PWK =  Round screw on top, should have a float height of 16mm

 

AS2 PWK = Flatish rectangular top, held on by 2 screws. should have float height of 7mm

 

 

^^^ This

^^^ This

Source please?

Source please?

 

For the bolt on cap short body carb like the '00-up Yamaha YZ250 or KTM 250SX, you will find the float level spec in the service manual at 6-8mm

 

For the screw on cap PWK carb like the '00 CR250 and aftermarket PWK, you will find the the spec in the service manual is 16mm.

 

You can't obtain a 16mm float level on a short body PWK if you tried.

Edited by CamP

Thanks for clarifying CamP.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now