XR250R_Nick Posted November 7, 2015 I recently purchased a 2001 XR250R. I noticed tonight that the output shaft has roughly 3mm of thrust play (in and out).The shaft spins freely, and I cannot feel or hear any bearing issues. I am unfamiliar with XR Hondas, but this shaft play seems strange. Is this normal, or a sign of bearing failure? Share this post Link to post Share on other sites
Baja trail Rider Posted November 9, 2015 I recently purchased a 2001 XR250R. I noticed tonight that the output shaft has roughly 3mm of thrust play (in and out).The shaft spins freely, and I cannot feel or hear any bearing issues. I am unfamiliar with XR Hondas, but this shaft play seems strange. Is this normal, or a sign of bearing failure? Run it no problem Share this post Link to post Share on other sites
sportchampsport Posted November 22, 2015 (edited) There are multiple thrust washers on that shaft. When they wear there will be side shaft movement. Or maybe they are missing all together? Edited November 22, 2015 by sportchampsport Share this post Link to post Share on other sites
