Jump to content
Sign in to follow this  

need to find steel friction discs: 1.5mm.

Recommended Posts

hi men

 

i want to swap my aluminum friction discs for steels in my CR250 2007

 

I have searched throughout oem references but the most suitable seem to be the CRF's but they are are 1.6mm.I need them to be 1.5m  not to vary the height stack and start having more problems

 

do you know some other honda model that has the same disk but steel in 1.5mm??

 

i prefer honda frictions  because they are the best ones for me

 

thanks you all

Share this post


Link to post
Share on other sites

the steels of my CR250 '07 are 1.6mm

 

i need steels 1.5mm thick and with the same pattern to fit the inner hub

Share this post


Link to post
Share on other sites

if i get all steels in 1.6mm , the overall height stack (steels + frictions) will increase 0.5 mm

 

that means the clucth will drag in too much excess or do nothing

Edited by frenando

Share this post


Link to post
Share on other sites

I put a cheap tusk kit in a couple weeks ago. I think the steels were 1.58. Clutch doesn't drag. More effort at the lever than before but my aluminum plates were worn WAY down.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...