Jump to content
Sign in to follow this  

2016 Beta 350 rr Sachs forks stacks (open chamber)

Recommended Posts

2016 Beta 350 rr o/c

Forks std

 

12mm rod

 

12mm Spring preload

 

Oil level 125mm

 

Comp

18x0.1

25x0.1 (2)

16x0.1

22

25         (2)

23

22

20

18

16x0.15

14x0.15

12x0.15

10x0.15

 

Mid valve

20x0.1 (2)

19x0.1

17x0.1

11x0.2

11x0.2

11x0.2

11x0.35

Float 0.35 feeler gauge measured

 

Rebound

3xDelta 0.1mm

16x0.1

12x0.1

16x0.1

10x0.3

 

Am told the insides are a copy of the WP forks but am unsure as I'm not familiar with either. Other notables the base valve threads are much finer than jap stuff, no peens (YAY). These stacks are way different to what was in the 2015 390 posted in here a few months ago.The delta shims on the rebound face were different to one another, the two on the face were pointier than the 3rd one. Sachs have been proactive for sure. Hope this helps someone.

 

Cheers

Marty 

 

ps base valve still 7mm ID :( 

Edited by MartyMOOSE

Share this post


Link to post
Share on other sites

Ahh yes I tried a 0.4mm each side of the face shim it would not fit. I'm going to play with them will post up another thread later would appreciate your input in you feel inclined :) 

Share this post


Link to post
Share on other sites

Thanks. Strange com. Stack for sure. You going to change? Wonder what rate the spring is?

Share this post


Link to post
Share on other sites

Yes bleed everywhere

The only bleed I can see is in the base Mog the 18 on the face! Do you mean the cross overs ? 

 

 

Thanks. Strange com. Stack for sure. You going to change? Wonder what rate the spring is?

 

The springs are 0.48 E-TECH

 

MM 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...