Jump to content
Sign in to follow this  

What cartridge will fit 05 rm250 fork?

Recommended Posts

The cartridge damper rods are shot in my 05 rm250 Showa 47mm forks. Was wondering if Rmz or CRF cartridge will fit into rm250 fork tubes. I would imagine they all would,but not sure if some are longer. Also the rm250 uses the spring tubes unlike the some of the other showa 47. Not sure if that changes anything. Thanks

Share this post


Link to post
Share on other sites

A lot of the cartridges are the same length but I don't know specific years, etc.

I have some Showa rods in my stash I could part with.

They're mint condition

Call or text me 740-988-6673 if you're interested

Share this post


Link to post
Share on other sites

What's wrong with your cartridges?  I have 2 sets of '08 RMZ450 forks that I'm going to piece out.

  • Like 1

Share this post


Link to post
Share on other sites

Damper rod is worn and bore is worn. They are shot.

Share this post


Link to post
Share on other sites

RM250 rods from 05 were 12mm diameter, RMZ from 08 were 12.5mm diameter FYI.

Share this post


Link to post
Share on other sites

Did you call jeremy kready at evo ind in pa? He sometimes has alot of parts laying around he'll sell for cheap.

Share this post


Link to post
Share on other sites

No.didn't call evo. Was hoping to just find some forks or cartridges and start fresh. I love my RM but the thing is beat and parts are getting hard to find . even if I replace the damper rods-the damper rod cylinder/tube is worn. Right now I got 46mm kyb of forks on and I really like them in rocks but if I push them hard they are bad. Think I'm going to keep the rm for fun and get a yz250x. Sux I like the rm250 and would buy a new one but Suzuki gave up. Oh well. Thanks guys

Share this post


Link to post
Share on other sites

Mine too. . Rebound adjust kept spinning n spinning .. I know have new forks off an 07 and one good extra fork (right) that makes a fine paper weight. . Funny thing is I bought both forks for half of what a single damper rod would of been. .. too bad showa sells the rod with the whole fork!!!??

Share this post


Link to post
Share on other sites

you may be able to pick up a complete set of forks for 200-300 bucks on ebay.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...