Happyapppy Posted November 22, 2015 I wanna get a yoshimura pipe for my 250 and I know they make different kinds. I don't know much about them, do any offer more power and less back pressure? I want one that gives more power and is also very loud. Share this post Link to post Share on other sites
Ringo25 My Rides (2) Posted November 23, 2015 I wanna get a yoshimura pipe for my 250 and I know they make different kinds. I don't know much about them, do any offer more power and less back pressure? I want one that gives more power and is also very loud. Could just take the packing out or use the bike till the packing is dirty. Way cheaper. Btw you lose power when the packing gets dirty. Share this post Link to post Share on other sites
William1 My Rides (2) Posted November 23, 2015 Best thing you can do is simply remove your existing pipe and all restrictions as well as the air cleaner. Skip the helmet, wear flip flops. When are you 'going pro'? Seriously though, you want loud just to annoy everyone? You are going to get to be beaten up on the net for making such a bad idea. No doubt, your bike is much faster than you are capable of using now. Share this post Link to post Share on other sites
BoxcarWilly My Rides (12) Posted November 23, 2015 What he said, you dummy. Share this post Link to post Share on other sites
mikeridered Posted November 23, 2015 What he said, you dummy. You guys forgot the no shirt/beer buzz angle. Share this post Link to post Share on other sites
trvshonda Posted November 23, 2015 Just buy some tuner car fart can and stick on there!! Share this post Link to post Share on other sites
Excitable My Rides (6) Posted November 25, 2015 Just buy some tuner car fart can and stick on there!! I did that once, added 50hp...well maybe 25 cuz i added 25 stickers at the same time, bit too much power now, gonna remove a few stickers to fine tune it. Share this post Link to post Share on other sites
Happyapppy Posted December 7, 2015 What's the difference in the two pipes...? I know it sounds stupid but what does one product offer that the other doesn't. Share this post Link to post Share on other sites
Rooster72 Posted December 7, 2015 I believe the FMF's are easier to rebuild due to having screws instead of rivets. I might be wrong, if so please TTrs please enlighten me. Share this post Link to post Share on other sites
Jlash My Rides (2) Posted December 7, 2015 I believe the FMF's are easier to rebuild due to having screws instead of rivets. I might be wrong, if so please TTrs please enlighten me. it wouldn't be hard if you have your own rivet gun and drill.. i have a powercore 4 on my steed and one of the allen cap scres stripped out on me and i had to cut a slit into it and remove with a flat blade.. the fmf is usually pretty easy to take apart though.. Share this post Link to post Share on other sites
Mr. RMZ My Ride Posted December 7, 2015 Yoshimura is better quality. Both are nice though. 1 Share this post Link to post Share on other sites
William1 My Rides (2) Posted December 7, 2015 Different manutacurers. Different materials Different sizes Different performance You question is like what is the difference between Nikes and Adidas. Is there a difference from track shoes and football cleats? Share this post Link to post Share on other sites
