Jump to content
Sign in to follow this  

No neutral on ktm 530 after rebuild

Recommended Posts

Just did a rebuild and got her running, but have no neutral. Well can't find it at all. I have yet to bleed my clutch but I would have thought it would make a difference, I tbe only thing I did was the single sump conversion which does nothing but join the sumps. I'm at work now and can't do anything. Any ideas guys on who may be the problem?

Share this post


Link to post
Share on other sites

Na just got on From work, will

have a look tomorrow, I will start with bleeding clutch

Share this post


Link to post
Share on other sites

If you can't find neutral with the engine running, then bleed the clutch first. But if you can't find it with the engine off, you've got something else going on.

Share this post


Link to post
Share on other sites

Have you tried finding neutral with the bike off? If you have,  bleeding the clutch won't do much for you.

Share this post


Link to post
Share on other sites

Well belly the clutch no neutral.. At all even when I pull the clutch I in? Oh well have to pull it again.. All I want to do is ride tis new 570 big bore kit.. Arrr

Share this post


Link to post
Share on other sites

I had a rod end seize.. So it was a new crank and related parts... Total strip down so box was apart. Box was fine at the time

. I take it I have to spit the cases to check that

Share this post


Link to post
Share on other sites

I bleed the clutch and that still won't work it's a weird one for sure. It just won't fmgo out of gear it will go right though all of them if I hold down on the shifter it go into a false neutral. But won't lock in..

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...