Jump to content

Suspension


Recommended Posts

I put in the 4.8 Nm front springs... and 60 Nm rear wp springs with stock valving... worked great being 230 lbs with all my gear... I blew out rear seal a few months later so decided to have suspension rebiult and revalve by Don at proaction suspension ( ardrie, alberta, canada) also had the bladder upgrade on the rear, that is a bit longer and some fabrication was needed on my bike to fit without rubbing on the exhaust.... now it is even better faster through whoops, smoother over roots and rocks, no more front end diving... not a complaint at all... Don answers all my questions whenever I have them... now that I have revalve suspension I will never have a bike without it.

Link to comment
Share on other sites

I had my suspension guy add the comp on the bottom and kept rebound on top. Lots of guys are doing this. It works great for NE woods. He all do added the bottoming cone. It's basically converting the 4cs to open cartridge forks.

Edited by 1 lunger
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...