Jump to content
Sign in to follow this  

Throttle cable replacement - XR400

Recommended Posts

One of my throttle cables needs to be replaced on my 2002 xr400 because the housing is worn through (stock carb/cables).  A couple questions:

  1. Is there any issue with replacing only the one, or is it good practice/maintenance to just do them both?
  2. Are OEM cables the best bet or are there aftermarket cables I should be looking at?

 

Thanks!

 

Share this post


Link to post
Share on other sites

Going with stock is would be the easiest. https://www.rockymountainatvmc.com/oem-schematic/2

 

Motion pro makes good cables but you'd most likely have to have them custom made to the stock parts specs.(length, type cable ends, etc.) or try to find a ready made set that's close enough. http://www.motorcycle-superstore.com/10025/i/motion-pro-throttle-cable

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...