jaws134 Posted January 18, 2016 Hello all, Getting ready to do the Top End (2013) about 100 hrs. I plan to use OEM piston/Rings. I have seen a few top end gasket kits out there. Any recommendations? Also If I decide to go with OEM Gaskets, do I need anything other than the Base/Head/Valve cover gaskets? Anyone have good luck with the Wisco or Vertex complete top end Kit. Thank you, Mark Share this post Link to post Share on other sites
Rotaholic Posted January 18, 2016 (edited) Pistons are all pretty good but I would only use oem gaskets. You should only need base and head, valve cover doesn't really need to be replaced, you can always put a little bit of liquid gasket in the valleys but they never leak. Edited January 18, 2016 by Rotaholic 1 Share this post Link to post Share on other sites
BDubb106 My Ride Posted January 18, 2016 x2... OEM only for gaskets. Share this post Link to post Share on other sites
rraiderr Posted January 19, 2016 Listen to Rotaholic, he knows his stuff. 1 Share this post Link to post Share on other sites
jaws134 Posted January 19, 2016 Thanks all, I appreciate the responses. Mark Share this post Link to post Share on other sites
