Jump to content
Sign in to follow this  

JD jet kit for slant FCR carb, few questions, 2001 Drz e

Recommended Posts

Hi, I have a 2001 Drz E

I can get a JD jet kit with the Scott fuel screw (longer) for 75 pound,

I've used the JD jet kit on a Drz S and results was great;)

Since I've got the Drz E in parts so why not do it when the carb is out of the bike, why not?

Would the kit come with everything I need for the Drz E slant fcr carb? Also I've removed the CE,

Got a after market exhaust

Snorkel removed same as 3x3 mod

Location is South Wales ( cf45 4pg )

I'm not clued up, on jetting to be honest but with help of this forum and JD instructions I done the Drz S with ease

Share this post


Link to post
Share on other sites

Yes the JD kit comes with everything you need and the instructions are easy so follow the jetting recommendations just like you did with the other bike/kit.   If you removed the coast enricher and just connected the two ports with a piece of hose you will be fine.   If you plugged the ports then you will need to bump up the slow air jet to a 100 from the standard 60.

Share this post


Link to post
Share on other sites

Thanks,,, roll_it_on, that's great, yes I've connected the 2 ports together so I don't have to change that jet,

I'm going to order the kit now then,

Many thanks,

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...