Jump to content
Sign in to follow this  

Have a Raptor petcock? What size is outflow nipple?

Recommended Posts

I am considering putting a Yamaha Raptor petcock (5LP-24500-01-00) on a different bike.  

 

What size is the outflow nipple/fitting?  1/4" or 5/16" or 3/8"?

 

Are the mounting holes 34mm c-to-c?

 

Thanks in advance!  Manual petcocks FTW!

Share this post


Link to post
Share on other sites

I am considering putting a Yamaha Raptor petcock (5LP-24500-01-00) on a different bike.  

 

What size is the outflow nipple/fitting?  1/4" or 5/16" or 3/8"?

 

Are the mounting holes 34mm c-to-c?

 

Thanks in advance!  Manual petcocks FTW!

 

Here is what I can say about that...

 

Yes, the bolt holes C-C are 34 mm

I just put one on my DRZ,  Used 1/4" tygon tubing.  I would say that the Raptor petcock is maybe, just maybe slightly under 1/4"??  I am speculating this because the fuel hose was easier to get on the petcock than it was to get on the carb--but still both ends are snug and I would not have chosen a different fuel hose than 1/4" i.d.  I swear buy Tygon hose because of its flexibility, resists kinks, is see through, and fits easily over barbs.  $8 for 5 feet here...http://www.mcmaster.com/#5187k63/=10t5zki

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...