OLIVER132 Posted January 25, 2016 (edited) want to know if i buy a set of graphics for OEM 2013 KX250F plastics will they still fit on Cycra power flow plastics, any help would be greatly appreciated. Edited January 25, 2016 by OLIVER132 Share this post Link to post Share on other sites
pCp 450 Posted February 4, 2016 Cycra power flow rear fender is a little different where it meets the seat. It has a little intake port going into the airbox. The port goes about 2 to 3 inches out towards the end of the bike. Fitting graphics onto this port takes a little patience with a razor knife and heat. But it's definitely not a show stopper. Other than that, applying graphics to these plastics is the same as any other kit. Share this post Link to post Share on other sites
OLIVER132 Posted February 4, 2016 So are you sure the front plate and shrouds the same? thnx for helping mate Share this post Link to post Share on other sites
DCBmx119 Posted February 4, 2016 Front number plate is the same. Shrouds are the same but the powerflows have an extra lip at the top that will show above your graphics. Share this post Link to post Share on other sites
OLIVER132 Posted February 6, 2016 Have you got them on your bike? if so could you send a couple of pics so i know what it is going to look like. Share this post Link to post Share on other sites
DCBmx119 Posted February 8, 2016 Yes, I have a full cycra kit, I will post pics tonight. Share this post Link to post Share on other sites
OLIVER132 Posted February 17, 2016 Are you still able to post some pics? Share this post Link to post Share on other sites
DCBmx119 Posted February 17, 2016 Haven't really had my bike out but once. I'll try to get some this weekend. Share this post Link to post Share on other sites
OLIVER132 Posted February 18, 2016 Haven't really had my bike out but once. I'll try to get some this weekend. Thnx mate Share this post Link to post Share on other sites
OLIVER132 Posted February 22, 2016 Hi just wondering if you can still put up some pics. Share this post Link to post Share on other sites