Jump to content
Sign in to follow this  

Shim restacker gurus here is question

Recommended Posts

Hi Guys

 

I have Fox snowmobile center shock

The shock has 37 mm diameter piston with 3 x 15,25*6,5 ports for damping and 3 x 6,25 diameter ports for rebound

 

Shim stack is following

 

Comp

 

Base plate 28 x 2,3 mm

33 x 0,25

20 x 0,25

23 x 0,25

25 x 0,25

28 x 0,25

32 x 0,35

3 * 33 x 0,30

28 x 0,15

4* 33 x 0,20

Piston

30 x 0,20

22 x 0,20

18 x 0,15

28 x 2,10

nut

 

piston rod is 1/2"

 

Question goes how this package looks in restackor?

 

What if i change the piston rod from 1,2" to 5/8" piston rod?

 

Regards,

Skoo

 

Share this post


Link to post
Share on other sites

Restackor creates damping profiles ,without having a good baseline to work against you will know nothing , and you need way more port geometry than you gave given ,have a look on the website

Share this post


Link to post
Share on other sites

Port geometry

 

Drod = 12,70mm

Dvalve = 36,83 mm

w.seat = 0,45 mm

Vspec = MVC

r.port = 9,00 mm

d.port = 6,50mm

w.port = 15,00mm

n.port = 3

h.deck = 2,50 mm

dleak = 0

dhrt = 10,99

N.thrt = 3

N.click = 10

 

Those F.stack and u.wheel values is not so easy to figure out.

 

Let say that there is 350 mm suspension travel and shock linkage is 1/3 and average speed like 60 kmh. Bump heights 200 mm and more

Share this post


Link to post
Share on other sites

I'm sorry but I don't have the time to run it for you ,maybe someone else will

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...