Jump to content

Which fork spring to use?

Recommended Posts

I ride a 2010 300XC and I am 140 pounds without gear. I ride a mixture of trails / single track and a little bit of motocross. My fork springs are currently .44 which is stock. Using the Racetech spring rate calculator it says for trails/enduro to use a .40 and for motocross use a .42. Will either of these make much of a difference from stock? If so, what would be best to suit both types of riding? I was thinking I should just split the difference and go with the .42 but not sure if it will make enough difference to even matter. Just wanted to get some advice. Thanks for the assist.

Share this post


Link to post
Share on other sites

0.42 from 0.44 is a feel able change and 0.40 would be lots softer,how does it feel with the 0.44 as unless it feels bad imo 0.40 maybe too big a jump

Share this post


Link to post
Share on other sites

I agree .42 springs will be all around better just in case you ride alot of different applications

Share this post


Link to post
Share on other sites

I ride a 2010 300XC and I am 140 pounds without gear. I ride a mixture of trails / single track and a little bit of motocross. My fork springs are currently .44 which is stock. Using the Racetech spring rate calculator it says for trails/enduro to use a .40 and for motocross use a .42. Will either of these make much of a difference from stock? If so, what would be best to suit both types of riding? I was thinking I should just split the difference and go with the .42 but not sure if it will make enough difference to even matter. Just wanted to get some advice. Thanks for the assist.

Get the .40's, if too soft run a .40 and .44 in each leg for an overall .42 spring rate.

Share this post


Link to post
Share on other sites

Get the .40's, if too soft run a .40 and .44 in each leg for an overall .42 spring rate.

:thumbsup:  Saving money in the process.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×