Husqvarna valve shim diameters

[Criticalshift]

Hey everyone! First time post here. I recently bought a 2012 Husqvarna TE511. I checked the valves and the intake is in spec. However the exhaust valves which call for .25-.30 are sitting about .22. I've called hot-cams and a few dealers with no help. They all told me that bike is not in the system.. I know that I need the flat pancake style ones, just don't know the diameter. Any help would be greatly appreciated, as this is my first time every doing a valve adjustment and I don't want to pull the cams and take off the shims just so I can measure them and have the bike sitting for a week or two with the engine apart like that. (afraid of moving the timing)

 

Here is a bit more info on the bike if anyone can help or guide me in the right direction!

 

Engine Family: BHQVC.478HVD

Displacement: 478 cc

Permeation Family: BHQVPP004RHD 

[Bad Juju]

9.48mm diameter on my '08 te510