XR600 'ignition only' wiring

[crmc33]

Hi Guys,

 

I think this must have been asked before but I cant find it on the forum....

 

Im just finishing off a XR600R rebuild and only want to run the bike on a total loss ignition wiring (ie No lights)

Can anyone advise what wires need to be connected to generate a good spark?

 

I have a new AC generator, pulse coil and HT coil and CDI ready to join up.

Is it OK to run the ignition with no AC regulator or rectifier attached?

 

Thanks for any help

[heart_of_darkness]

By total loss you mean battery powered, or you mean the bike only generates ignition electricity but not accessory power?

[soddo]

No AC regulator needed. CDI probably has its own regulator on the circuit board. What is needed:

 

- Kill switch

- Pulse generator

- CDI box

- Coil

- Stator

 

See attached wiring diagram what you should keep. Just follow the lines.

[crmc33]

Thanks, thats great. I just want to run without a battery for weight saving and simplicity.

I wasnt sure if running the generator without anything to take the power from the lighting power generator would fry the stator but it sounds like it wont. I suppose it make sense, without a completed circuit there wont be any current passing through the lighting part of the stator.

 

My blog needs updating but there are some details of my ongoing project!

http://xbr-supermono.blogspot.co.uk/