Jump to content

WP Cone Valve Forks — Mid Valve stack advice?

Recommended Posts

I'm seeking a mid-valve shim stack to use with my WP Performance IFP Kit (Base Valve). Does anyone have the shim stack spec's from a Cone Valve style fork that has been modified back to a mid-valve stack for MX? I would love to have a default starting point to use in place of the existing mid-valve stack that came with my CC Forks to complete my WP CC Bladder fork conversion to a cone valve style setup.

Share this post


Link to post
Share on other sites

Older style Factory (is the same as cone valve fork, without cone valve) fork using the stack:
8x20x0,1
8x20x0,1
8x18x0,1
8x16x0,1
8x14x0,1
8x12x0,1
6x9x0,2
6x9x0,2
Float 0,2 mm

Edited by demzsolt
  • Like 1

Share this post


Link to post
Share on other sites

Older style Factory (is the same as cone valve fork, without cone valve) fork using the stack:

8x20x0,1

8x20x0,1

8x18x0,1

8x16x0,1

8x14x0,1

8x12x0,1

6x9x0,2

6x9x0,2

Float 0,2 mm

 

So that was the Stock valving on the generation of cone valve forks prior to the cone valve? What year?

I'm going to measure my current stock mid-valve shim stack and see if anyone has some ideas on which direction to go with.

Share this post


Link to post
Share on other sites

So that was the Stock valving on the generation of cone valve forks prior to the cone valve? What year?

I'm going to measure my current stock mid-valve shim stack and see if anyone has some ideas on which direction to go with.

I do not know the fork year. Stickers on the forks Lippolis Suspension, maybe revalved..

Share this post


Link to post
Share on other sites

I do not know the fork year. Stickers on the forks Lippolis Suspension, maybe revalved..

 

10-4, thanks for the spec's anyway. I'm going to try document mid-valve stacks and see where it leads me.

See the pictures..

 

Standard 48mm tubes, yes?

Edited by tk2stroke

Share this post


Link to post
Share on other sites

10-4, thanks for the spec's anyway. I'm going to try document mid-valve stacks and see where it leads me.

 

Standard 58mm tubes, yes?

Fork legs 48mm, not 58..

  • Like 1

Share this post


Link to post
Share on other sites

Notice how soft that mid stack is

Here's a 2010 sxf450

MID

20x0.10*6

18x0.10*3

16x0.10*2

10x0.20

8x0.30

  • Like 1

Share this post


Link to post
Share on other sites

Notice how soft that mid stack is

Here's a 2010 sxf450

MID

20x0.10*6

18x0.10*3

16x0.10*2

10x0.20

8x0.30

 

Is this from a WP CC fork?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×