84 xr200r cam needed

[BlueFalcon]

I need help locating a camshaft and rockers. New or used is fine (decent condition obviously).

Thanks for any help

Honda part #s

14100-KKO-010 (cam)

14441-KKO-010 (rocker)

14431-KKO-010 (rocker)

Edited April 22, 2016 by BlueFalcon

[chadzu]

Me too

[BlueFalcon]

Yeah it sucks that none are available anywhere that I can find, I even checked the UK and Russia. Bike is in great condition aside from the obvious.

[valvesrule]

All the RFVC XL/XR250 84-94 cams are the same as the 200 but they're just as hard to find. I don't do RFVC 200 or 250s anymore cause the cams and intake valves are nearly impossible to come by.

Edited April 22, 2016 by valvesrule

[BlueFalcon]

I talked to the people at Webcamshafts.com and they can weld and regrind back to stock the cam and rockers, but it's $240 to do the cam and $50 per rocker

[Chuck.]

Megacycle also rebuilds cams/rockers, they did my XR last summer.

[BlueFalcon]

Megacycle also rebuilds cams/rockers, they did my XR last summer.

Do you remember what they charged?

[Chuck.]

I don't remember, give them a call. They only did the cam, I bought new rockers.

[BlueFalcon]

So I found a place with a reasonable price to repair the rockers. Question is does anyone know where I can find the measurements for the rocker pads? Angle etc.

Thanks in advance

[HomerDodd]

I talked to the people at Webcamshafts.com and they can weld and regrind back to stock the cam and rockers, but it's $240 to do the cam and $50 per rocker

 

A bit pricey, but I would be willing to pay it if it meant a few more years of riding my XR, which I absolutely love. Good info, thanks.

[Chuck.]

Megacycle Cams.provide the same services.