Ok guys first thing first... I have a 2012 wr450 that is sm. Me being a fan boy of HIDS I installed a 35 watt ballast and bulb. This was the cause of all problem listed next. After I installed it the bike would be dead when I would come to a stop. So after a 30-40min ride the bike wouldn't start over via starter. I then decided to wire in a switch to turn on and off the hid when I needed it aka at night. Well I went on a group ride yesterday with the hid off and when it came to turning the HID on at night no power. Or the small running light. So I rode literally a foot ball field and get an engine light. (Code 46) I stopped at the nearest gas station to find the bike able to turn on via starter but shortly after running it would start to flicker on the dash between thumps and start to die out. I finally got it to a buddys house gunning it between it being on and me dropping the clutch to force it on. So what I've done so far is rip the dumb ass hid out and install a normal bulb. Me being narrow minded thought after I turned it on it would recharge the battery and I could ride home but now it keeps dying out after I get it started. Also there is no running light or headlight on when I kick it on like it used to, I checked the fuse and it isn't popped. I never tampered with the stock headlight wiring. So it should turn on when the bike is on right? Any clues on the dying after kicked on symptoms and the non working headlight?