Looking for a few front front spokes to fit YZ250F

[95s10nj]

Me and another rider tangled up yesterday during a race and his footpeg got caught in my front wheel. It ripped out 2 spokes and damage another. Anyone have a 4 or 5 spokes to fit a 2016 YZ250f 21x1.60 oem wheel/hub? Yamaha only sells them as a set.

[ronbuell]

i saw a whole wheel on eBay for $30 for a z125.....

[95s10nj]

i saw a whole wheel on eBay for $30 for a z125.....

 Thanks. I have been keeping my eye on some stuff on there but didn't see anything that cheap so I ended up purchasing spoke repair kit from ksrwheels.net. He sells an oem 2 spoke/nipple kit for 10 bucks.

[ckny]

Thanks. I have been keeping my eye on some stuff on there but didn't see anything that cheap so I ended up purchasing spoke repair kit from ksrwheels.net. He sells an oem 2 spoke/nipple kit for 10 bucks.

Kawi spokes fit. I used them on my 15FX.

[95s10nj]

Kawi spokes fit. I used them on my 15FX.

 

Good to know. Since I ripped 2 out and damaged a nipple on a third all on the non brake side, should I loosen all of the spokes and true it from scratch?

[ckny]

Good to know. Since I ripped 2 out and damaged a nipple on a third all on the non brake side, should I loosen all of the spokes and true it from scratch?

I would if you ripped them out. I trued mind after bending 2 and cracking a nipple.

[95s10nj]

I would if you ripped them out. I trued mind after bending 2 and cracking a nipple.

 

ok thanks. It figures that about 10 nipples were seized on to the spokes and were destroyed loosening them.

[MANIAC998]

That's nearly always the case! When you rebuild her, use Anti-Seize, and you will never have a problem again!

[95s10nj]

So I ordered some kx spokes 41032-0003 and nipples 41032-0002. The spokes appear to be the same minus the thread length on the spoke but the nipple body head diameter is smaller on the kx spoke nipple than the stock one. Anyone know if this will cause an issue?

[95s10nj]

[ckny]

I used smaller nipple without issue.