Yz295

[LAYZ71]

Been trying to get in touch with Eric gorr for the past couple days. Haven't had any luck, I need a new topend for my yz but can't seem to order it from his site. And can't seem to get in touch with him to order either. Is there some other way to order it?

[StillSmoking]

  His sight says he is closed for September for vacation and re tooling. It's going to be more expensive but you could order the parts through Millenium Tech.

Edited September 25, 2016 by StillSmoking

[frankiewhipit]

He & Millennium are no longer "partnered" up, I don't think you're going to get Eric Gorr porting if you order from Millennium Technologies

 

Re-reading the post, you're just looking for the parts, my bad!

Edited September 26, 2016 by frankiewhipit

[LAYZ71]

Unfortunately I may have to do that. I'd rather buy from Eric because I like wiseco pistons and it seems like millennium only carries a wossner in a 72mm. But I have a race next weekend so I guess I'll be giving wossner a try.

Lol yea I just need a topend.

Edited September 26, 2016 by LAYZ71

[Kashofthewoods]

Wossner makes a solid piston from local experience. Few guys run them in their sno cross/freestyle sleds and absolutely live by them

[LAYZ71]

I don't doubt they have a good product. I've just always used wiseco for my 2 strokes with good results

[numroe]

He & Millennium are no longer "partnered" up, I don't think you're going to get Eric Gorr porting if you order from Millennium Technologies

Re-reading the post, you're just looking for the parts, my bad!

If EG and MT are no longer doing business with each other then do you know who EG uses now for nikasil cylinder plating?

[LAYZ71]

Apparently EG and MT have separated. Spoke with MT today when I ordered my piston

[adam8781]

wossner is a superior german made forged piston, dont hesitate to run one

[JETMX1985]

You could have just called Wiseco and ordered it directly from them.

[LAYZ71]

Yea thought about that afterwards. Ohwell I'll try out wossner.

I haven't heard much about wossner so I've been a bit hesitant to try them. Also I've always had good luck and experiences with wiseco. I've had to get parts from them for a few cars. Both cars are still running after countless passes at the drag strip with a lot of nitrous going through them. And the one time I had to call them directly was to get a piston for one of those cars because the company I ordered from sent 7 identical and 1 different. Wiseco sent me a new piston overnight mail to my house.

[numroe]

After the EG/MT split, did anyone ask EG who he gets to do his cylinder plating work now?

[frankiewhipit]

After the EG/MT split, did anyone ask EG who he gets to do his cylinder plating work now?

US Chrome, he did 2 cylinders for me a couple of weeks ago, All is good!

[LAYZ71]

Awesome plan to send my cylinder back when I do my next topend.