Jump to content

YZ 125 suspension questions.

Recommended Posts

I currently have a 2011 YZ 125, I recently had the stock springs put back in the forks and rear shock. I would like to bring the all clicker settings and sag back to stock and then do some fine tuning from there. If anyone knows all the stock clicker/sag settings please let me know!IMG_0013.JPG

Share this post


Link to post
Share on other sites

Infos from my 2010 YZ125 service manual:

 

forks :

spring rate: .42kg/mm

outer tube oil volume: 333cc

compression: 13 clicks out

rebound: 14 clicks out

 

shock :

spring: 4.7kg/mm ('10 had a Titanium spring, '11 should have too up to '13?)

nitrogen: 142psi

sag: 90mm to 100mm

high speed compression: 2 turns out

low speed compression: 13 clicks out

rebound: 11 clicks out

 

Stock spring rates are in the ballpark for a 140-150lbs rider.

Edited by mlatour
  • Like 1

Share this post


Link to post
Share on other sites
Infos from my 2010 YZ125 service manual:
 
forks :
spring rate: .42kg/mm
outer tube oil volume: 333cc
compression: 13 clicks out
rebound: 14 clicks out
 
shock :
spring: 4.7kg/mm ('10 had a Titanium spring, '11 should have too up to '13?)
nitrogen: 142psi
sag: 90mm to 100mm
high speed compression: 2 turns out
low speed compression: 13 clicks out
rebound: 11 clicks out
 
Stock spring rates are in the ballpark for a 140-150lbs rider.


Thank you very much!
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×