Jump to content

Motion Pro T3 Cable

Recommended Posts

On my 05 CRF250R I only use a Motion Pro OEM replacement clutch cable and IMO they are better and easier that actual OEM ones.

I've heard about T3 Slidelight but not personally tried them. I was interest and checked this out but can't get this to load any vehicle :(

https://www.motionpro.com/motorcycle/tools/featured/t3_cables/

Sorry if thats not very hekpful

Share this post


Link to post
Share on other sites
Does the T3 cable significantly reduce the clutch pull as advertised?

Nope. Really not at all compared to any properly maintained cable. I even did a super scientific pull test with a fish scale and zip ties to gauge the clutch pull with the stock cable and T3 "Slide Lite" ...no difference whatsoever. What it did do was break on me when I was way out in the woods one time about a year and a half after I installed it and I was in a spot where I couldn't push start it, which was annoying. When I got back home, I put the stock cable back on and it's still going strong almost two years later. Not worth it.

Share this post


Link to post
Share on other sites

Sometimes people install "heavy duty" (stiff) clutch springs when they replace their clutch fiber and steel plates. Makes it harder to pull...

You may just need stock springs...

Make sure the cable isn't pinched anywhere...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×