Jump to content

2013 crf450r clutch in a 2010?

Recommended Posts

Looking for some advice for a buddy with a worn out 2010 crf450r clutch. I have a 2013 and replaced my entire clutch with a rekluse core exp. my question is I know the baskets are the same for most years of 450Rs, is there any reason the the hub from my 13 wouldn't fit his 2010? I assume it would but I don't want to get in there and find out it's not compatible. I assume if the hub fits, then he can use my 6 spring pressure plate and 13 steels and fibers for a decent upgrade over his weak 4 spring setup. I know someone on here has the knowledge so figured I'd ask. Thanks

Share this post


Link to post
Share on other sites

I don't believe they are compatible.  The 09-12 models are different then the 13-16 clutch assemblies.   I have a 6 spring Hinson unit from my 10 I was going to sell since I'm looking to upgrade to a 17 model.  Send me a pm if your friend is interested.     

Share this post


Link to post
Share on other sites

They changed the spines on the inner hub on the 2013. I think they changed it back to the 02-08 splines.

If he finds a 6 spring inner hub from a 09-12 the other part s will work.

Share this post


Link to post
Share on other sites

all 9-12 450s hondas are 4 spring, changed back to 6 in 13, so its a no go.

Share this post


Link to post
Share on other sites

polishhammer hit the nail on the head. the splines are different

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×