Jump to content

2015 YZ wheels into.. 2016 17 WR??

Recommended Posts

Any thoughts on that??

I've had this set now for almost two years in anticipation of the new WR..

However..

After reading some posts:

I'm not too sure if these would make it onto the bike..

front axle on the yz has 25mm and rear 22mm the wr front 22mm rear 20mm..

would it work to alter the bearings??

or...

32672937-Funny-garbage-bin-for-recycle-S

 

thoughts anyone??

 

IMG-20140604-WA0002_zpseyumk2ny.jpg
IMG-20140604-WA0004_zpshifxibds.jpg

Edited by patrick2wd

Share this post


Link to post
Share on other sites

Front on the WR/FX is 22mm, YZ is 20mm...as far as it's known no bearing with the correct outer diameter of the YZ hub and the inner diameter of the WR hub work... There might also be the speedo issue too... 

The rear is a 25mm, your rear is 22mm and as far as known no bearing with the correct outer diameter of the YZ hub and correct inner diameter of the WR exist. 

In short you are SOL... 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×