Jump to content

te250 to te300 small mistake

Recommended Posts

hi i  bout a 250 to 300 conversion kit for my 2016 te250 already went more then half way thru the installation only to find out that the

kit if for 12-14 sxc i am mostly worried about the cdi cose i don't want to loose the way the huski handles compared to the ktm any 

one knows how big of a different dase it makes 

ps . i stupidly trusted the the maine dealer know wat they are selling 

Share this post


Link to post
Share on other sites

Just use the CDI from the TE 250, if you don't like the SX CDI. 

Share this post


Link to post
Share on other sites

 u cant use a te250 cdi with a 300 the timing  is wrong cose of the compression u can use a tc250/sx250 with a 300 te/exc  cos of the mx top end 

but in the end thay all have the same parts number so its ok 

 

ps i wrote sxc instead of exc 

sorry i am kinde feeling under the weather 

Share this post


Link to post
Share on other sites

Don't want to be argumentative but the TE 250 CDI can indeed be used on the 300. I've done it before without issue. 

Share this post


Link to post
Share on other sites
8 minutes ago, jugnuts said:

Don't want to be argumentative but the TE 250 CDI can indeed be used on the 300. I've done it before without issue. 

i might tray this 

i did finish the bike and rode it using the exc cdi its ok needs re jetting and a new needle 

i have 32.5 pilot  the old te250 needle haven't touched the maine bat i have a 172 main  on the side 

i will get 30 pilot a new needle and put the 172 main

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×