Jump to content

Recommended Posts

Hi all, a couple of questions for the carb gurus out there. I have a 1996 Yamaha wr200 on which i would like to replace the carb on as parts for it as hard to come by. The slide on mine is very worn looking as all the coating is worn off it and it is starting to stick when riding it making it a scary prospect when it happens. The carb fitted is a Mikuni TM30SS and my question is has any one fitted a pwk carb to these bikes. The engine has been rebuilt and is fine in that regard. The bike had a hard life before i got it  in South Africa in Pretoria according to the manual so i would like to swap the carb if possible. It has an FMF pipe and silencer fitted.  It is a lovely bike to ride and is great for the woods where i travel off road so i would like to set it up well. Any help would appreciated.  

 

Regards

John

IMG_0004.JPG

IMG_0003.JPG

IMG_0001.JPG

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×