Jump to content

Stator torque setting

Recommended Posts

I have just done the loctite fix on the stator and starter. I could not find any torque settings for the 3 bolts on the stator they were quite loose and the thread lock was old. I put in medium thread lock  and snugged them up. 

Is there a torque setting for the 3 bolts on the stator. 

Share this post


Link to post
Share on other sites

The bolts are 5mm in to a soft magnesium cover so torque is not very high.  There is a torque value but unless you have a 1/4" drive torque wrench with a range of 0 to 100 inch pounds, the value is not of much use. By feel good and snug with a hex key (Allen wrench).

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×