Jump to content
Sign in to follow this  

2017 300XC Lower footpeg option?

Recommended Posts

The cheap option to get them 6mm lower is fit the sx version pegs as I did which are lower as standard. They raised the height of the enduro bikes whilst the MX kept the lower pegs. Worked ok for me

  • Like 1

Share this post


Link to post
Share on other sites

Check the part numbers if the SX footpeg differs from XC / XC-W?

I found out that at least -17 Husky FC peg is few millimeters lower than FE peg and changed them, happy with the results!

Edited by Husabetunia

Share this post


Link to post
Share on other sites

So after taking them apart, what I did was grind down about a few mm of material off the footpegs where they sit up against the frame, and that lowered the pegs about 1/4 inch to 1/3rd inch.  I just found they were angled up very high in stock form.  Doing this flattened them for no cost and worked great.

Should have taken pics, but I already put everything together.

 

 

Share this post


Link to post
Share on other sites

I tried the SX pegs on my 17 300 XCW and they were not enough. Went with the expensive Fastway, and I really like them. I like how wide (fore-and-aft) the Fastway pegs are, makes it easier to stand.

Share this post


Link to post
Share on other sites

The steel fast ways are around $150, not to bad. I've been running them for about a year. I like how it moves them down and back a little 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...