2017 300XC Lower footpeg option?

[95jersey]

Other than the expensive Fastway, are there any other options to lower the stock foot peg height? 

[powdermuncher]

good question I am in need of some for my17 250 xc-w as well

[jamesw9404]

The cheap option to get them 6mm lower is fit the sx version pegs as I did which are lower as standard. They raised the height of the enduro bikes whilst the MX kept the lower pegs. Worked ok for me

[Husabetunia]

Check the part numbers if the SX footpeg differs from XC / XC-W?

I found out that at least -17 Husky FC peg is few millimeters lower than FE peg and changed them, happy with the results!

Edited April 26, 2017 by Husabetunia

[95jersey]

So after taking them apart, what I did was grind down about a few mm of material off the footpegs where they sit up against the frame, and that lowered the pegs about 1/4 inch to 1/3rd inch.  I just found they were angled up very high in stock form.  Doing this flattened them for no cost and worked great.

Should have taken pics, but I already put everything together.

 

 

[pat22043]

I tried the SX pegs on my 17 300 XCW and they were not enough. Went with the expensive Fastway, and I really like them. I like how wide (fore-and-aft) the Fastway pegs are, makes it easier to stand.

[milosbgd]

any one knows what are the dimensions for standard KTM 300 Exc 18-20 footpegs. I cant find the measures?

Thanks

[Dirtstache 556]

The steel fast ways are around $150, not to bad. I've been running them for about a year. I like how it moves them down and back a little