Need end all be all throttle tube and cable setup

[cordova2008]

Looking for the best throttle setup, im replacing everything from fcr to right hand. I read some poor reviews about zeta aluminum, g2 tube gets ok reviews, and i think i remember someone modified a pro taper twister to work with the drz. 

Would the twister work with a throttle housing from a different bike? i do plan on removing return cable and replacing pull cable, motion pro cable for a drz400e the best option?

I see some lube wet, some use graphite and some dont do anything, whats best?

 

thanks for your help guys

[38super]

plastic R6 throttle tube and stock pull cable.

[HansLanda]

I used Motion Pro E model cables, and superglued zipties around the stock tube for a shorter pull. Been solid for a long time now.

[ohiodrz400sm]

Stock, there are plenty of other areas that need modified before worrying about the throttle.

 

There is nothing wrong with the way a clean, dry stock unit works.

 

 

[RingwoodRaceway]

zeta quick turn aluminum has treated me well on sm

[jjktmrider]

I have the stock E cables on mine , cables get lubed with Motion Pro cable lube every 6-10 months , usually sprayed enough through to wash out any dust/grunge ect.. Been doing that to all my toys since I can remember and haven't had to replace a single cable , when starting with a good or new one from the get-go.

I have a G2 on my Husky , still way, way too fast but it works fine otherwise.

 

 

.

Edited April 26, 2017 by jjktmrider

[Halfmt1]

12 hours ago, RingwoodRaceway said:

zeta quick turn aluminum has treated me well on sm

Same here, one of my favorite mods.

[cordova2008]

Thanks Guys, I think I might end up replacing with oem stuff and some e cables.