Jump to content

2000 CR250 Reed Boot replacement

Recommended Posts

I need the boot between the reed valve and the carb.  It shows discontinued from Honda.  Are there any other years that will fit?  Mine is in bad shape and I need to find a new one.  I also looks like the previous owner cut the boot flat on the side that faces the reed.  

 

 

Reeb Boot.JPG

Share this post


Link to post
Share on other sites
14 hours ago, shrubitup said:

97-01 should be similar. 

I ordered a 99 boot I found in Feebay.  I'll report back how it works.  Different part number, but I know the reed side is the same.  I'm guessing a slight boot angle difference.  

Share this post


Link to post
Share on other sites
I ordered a 99 boot I found in Feebay.  I'll report back how it works.  Different part number, but I know the reed side is the same.  I'm guessing a slight boot angle difference.  

I can send you a minorly FUBARRED one from a husky wr300. Same bolt pattern but has notably different carb alignment due to non perimeter frame. Free plus $10 shipping.
  • Like 1

Share this post


Link to post
Share on other sites
6 hours ago, shrubitup said:


I can send you a minorly FUBARRED one from a husky wr300. Same bolt pattern but has notably different carb alignment due to non perimeter frame. Free plus $10 shipping.

I may take you up on that if this 99 one doesn't work.  Thanks man!

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×