Jump to content

Jetting Question MRD and 3x3 (Sorry, i know it gets asked a lot)

Recommended Posts

Hey folks, I recently got a 2003 DRZ400s after wanting one for quite some time. Got new turning lights on, headlight, taillight. Have a manual cam chain tensioner and case protectors on the way and radiator guards installed.

But now it's on to performance stuff. After 6 weeks my MRD SSW has arrived along with my JD Jet kit. but i need some assistance on what to tune the carb to with the provided parts in the jet kit so i don't have to try the hit and miss method of tuning.

3x3 mod (Stock Air filter)

MRD SSW

1200 FT Elevation

Stock Carb

around 75-80 Degrees temp

Thanks, wasn't quite sure where to look for my specific Elevation and such. Sorry again for another jetting post.

And i will soon do the lock-tight fixes using the forums in the FAQs page. Awesome info!

  • Like 1

Share this post


Link to post
Share on other sites

Mine was spot on from the instructions i think they figure if you are jetting it you will do the 3x3 mod

Share this post


Link to post
Share on other sites

Il'm just a contributor, don't know the originator but my helmet's off to the idea.  Great tribal knowledge for DRZ jetting. 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×