Jump to content

Clutch Cover Protecter Install

Recommended Posts

Hey guys its me again... the motocross noob and this time I bought a clutch cover protecter when bought my brand new 2017 yz250f so that it wouldn't get all scratched up. It came with longer hardware etc. do you know if when I take off the clutch cover bolts to bolt the protecter over the top will it leak oil? If it will I will just wait till after I break it in while I'm doing the oil change. Any help would be greatly appreciated!

Share this post


Link to post
Share on other sites

Mine didnt leak when I put one on my 2016 wr

Just be gentle and dont knock/disturb the existing cover and you should be able to fit it without loosing any oil

Also lay the bike over on the left side...I leant mine against a wall so it was leaning over further than when on the stand do the oil was all over the opposite side 

Edited by GuyGraham
  • Like 1

Share this post


Link to post
Share on other sites
Mine didnt leak when I put one on my 2016 wr
Just be gentle and dont knock/disturb the existing cover and you should be able to fit it without loosing any oil

Ok so just take the bolts out and let the cover sit in their and don't touch it till I have tourqued them back up?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×