Jump to content

2010 husky WR250 fork valving help needed

Recommended Posts

I am trying to improve my fork set up, I am new to playing around with valving so any help would be greatly appreciated.

 

I am 67kg with no gear on and the bike has done 24 hours so everything is in good shape internally.

 

I don't like the current set up is it is a little harsh with small bumps.

I was thinking of removing two of the 24mm shims, Dose anyone know if I am on the right track?

 

I am running 4.0 springs in the forks and a 5.2 in the shock, one rate softer than stock,  should I be considering a shim change for the softer spring rate as well?

 

I am keen to do whatever possible to make the forks and shock work the best they can.    

 

Currently my comp valve stack is stock, see below.

 

24 .1

11 .3

18  1

18  1

18 .5

11 .25

13 .15

16 .15

18 .15

20 .15

22 .15

12 .1

24 .1

24 .1

24 .1

24 .1

24 .1

24 .1

Share this post


Link to post
Share on other sites

I woukd try 3 just to prove the problem

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×